The Record mouse pointer function enables you to choose whether the recorded video should include the computer mouse pointer. If you choose to include the pointer, set the color/size of the pointer, and the color/size of the mouse left/right clicks.
Record mouse pointer : Clicking this will record the screen including the mouse pointer, and unclicking it will record only the screen, excluding the mouse pointer.
Mouse pointer : Checking this will record the mouse pointer. It will record the movement of the mouse within the screen. Unchecking it leave the movement of the mouse pointer out of the recording.
Mouse left button : Checking it will indicate the relevant parts clicked by the mouse left button with the color you selected. Unchecking it will leave the effect of the mouse left-click actions out of the recording.
Mouse right button : Checking it will indicate the relevant parts clicked by the mouse right button with the color you selected. Unchecking it will leave the effect of the mouse right-click actions out of the recording.
2. Capture image to clipboard
In this mode, the captured image will be copied to the Clipboard automatically so that you can attach it to an e-mail or paste it in a document.
3. Display the usage guide when the program starts
Set this option to view the usage guide each time you run the GOM Cam.
1. Select device
If you select the mike and audio device connected to the PC, then the sound output to the pertaining device will be recorded in the video.
2. Video setting
This enables you to set FPS, size, and quality of the video. Increasing the bit rate will enhance the video quality. You can also set recording quality for general screen recording and game recording modes.
The Codec allows you to choose between H/W encoding(encoding via NVIDIA, Intel Quick Sync graphics card) or CPU encoding.
H/W encoding is high quality but the file size is larger than the CPU encoding. CPU encoding has a small file size but low quality compared to H/W encoding. Please choose according to the quality and size of the file.
NVIDIA, Intel Quick Sync options are only exposed if your device is supported on your PC, and only in CPU encoding if you do not have both devices
3. Audio setting
This enables you to set the format, channel, and quality of the audio recorded in the video. Increasing the bit rate will improve the audio quality.
1. Set file path
This menu enables you to view or change the file storage path. To change the path, click the [Browse] button.
2. File name
This menu enables you to set rules for stored file names. The default rule for file names is 'COMCAM Date_Time'.
User Definition + Date and Time : The user may add text to the front of the date. For example, if you want to add “My Video” in front of the date, enter that text into the input field, and then the files created afterwards will have the name start with “My Video”.
Date + Time : This setting will record files with names including the date and time at which they are created, without any additional text in the name.
3. Divide file size
This function enables you to divide one video file into files of a specified size. For example, if a 1-hour video is stored in a file, it will be difficult to share that file in an SNS or attach it to an e-mail. In such cases, it will facilitate uploading of the file if it is divided into smaller files that are 100 MB or 200 MB in size. Under Divide Storage Size, you can choose the unit size in which video file should be divided. If you set the size of divided files at 100 MB and record a video, then the video will be stored as divided files that are each 100 MB in size.
1. Automatic stop
This is a function that enables automatic stopping of a recording. The recording stops at a set time or file size when you click the Start Recording button without setting a recording duration.
1) Recording Time
If you set Hour:Min:Sec, then the program will carry out the action that you select under “Select Action” when the recording time elapses for the set time.
Stop Recording : At the set time, the recording will be stopped.
Exit Program : At the set time, the recording will be stopped and the program (GOM Cam) will be closed.
Shut down PC : At the set time, the recording will be stopped and the PC will be turned off.
2) Recording size
In this menu, if you set a file size in the unit of MB or GB, then the program will carry out the action that you select under “Select Action” when the file size reaches the set value.
Stop Recording : At the set file size, the recording will be stopped.
Exit Program : At the set file size, the recording will be stopped and the program (GOM Cam) will be closed.
Shut down PC : At the set time, the recording will be stopped.
2. Font style of the drawing tools
This menu enables you to set the text font of the draw tool for the Recording window.
3. Show countdown befor recording
Enabling this option will display 3-second countdown when you click the Start Recording button. If you want recording to start immediately without a countdown once you click the Start Recording button, please disable this option.
4. Record with audio
This option will include the sound output from the audio device of the PC into the recorded video. If you wish to only record the screen without any sound, then disable this option.
5. Keep the last effect settings when exit the program
This option will store the effects added to the Set Effect window in the Effect List until it is deleted by the user. This enables you to choose whether to keep the setting made in the Effect List for the next recording. If the last setting state is “Use”, then the last effect will be applied automatically to the next recording.
6. Display the recording menu tooltip during recording
Because everything in the recording area will be recorded during the recording, the tooltip message shown while you use the menu buttons in the Recording window may get in the way of image shown in the video. If you disable this option, then tooltip messages shown while you use the menu button will not be recorded.
1. Settings stop
Select the item you want to set a hotkey from the list, enter the hotkey, and click [Settings] button.
F1 ~ F12, ctrl, alt and shift keys can be input directly. (The ctrl, alt, and shift keys can not be used alone, and must be used in combination with other keys.)
Hotkeys can not be duplicated.
2. Release all
If you want to remove all the set hotkeys at once, click the [Release all] button.
This button is used to release each hot key one by one.